KWO® Universal B is a gasket tape made from 100% pure, monoaxially expanded PTFE.
In order to ensure a quick installation KWO® Universal B ePTFE tape is fully self-adhesive and cut to the required width. Given its elasticity, the material adapts well to uneven surfaces even at low gasket stress.
The tape is easy to install and to remove. Bolt holes can simply be punched after the gasket has been attached.
KWO® Universal B ePTFE tape is widely used as sealant for large frames.
|
Material
|
Chemical Resistance
|
Temperature Range
|
Pressure Resistance
|
Physiologically inert
|
|---|---|---|---|---|
|
100 % expanded PTFE (ePTFE) without fillers – self-adhesive
|
pH range from 0 to 14; full chemical resistance (except molten alkali metals and elemental fluorine)
|
Recommended temperature range: from -200°C to +130°C; material heat resistant up to +315°C
|
Resistant within the usual pressure range of standard flanges up to 10 bars; suitable for vacuum applications (depends upon the concrete installation conditions)
|
Physiologically harmless in all recommended applications
|
The KWO Quality Management is certified according to DIN EN ISO 9001. Our suppliers are also integrated in this quality system. We use exclusively high quality raw materials in the fabrication of our products, which provide the highest level of safety and reliability.
|
Dimensions* [mm] |
Spool length [m] |
||
|
10 |
25 |
50 |
|
|
20×0,5 |
X |
||
|
20×1 |
X |
||
|
25×1 |
X |
||
|
50×1 |
X |
||
|
25×1,5 |
X |
||
|
50×1,5 |
X |
||
|
25×2 |
X |
||
|
25×3 |
X |
||
|
50×3 |
X |
||
|
100×0,5 |
X |
||
|
180×0,5 |
X |
||
