The 9335 manual packing cutter cuts packings at a perfect 45° [diagonal] or 90° [blunt] angle by simply adjusting the guide rail. Push up the lock button and move the guide rail until it clicks into place for the 45° or 90° setting. Press down the blade; do not adjust the cutting angle with the blade exposed. Cuts all non-metallic packing types in flexible graphite, PTFE, ePTFE, acrylic, ramie, polyamid, etc.; not suitable for pure aramid packings. Also cuts O-ring material, rubber and silicon profiles
The accessory set consists of a two-step manual blade grinder and a replacement blade with centre pin. The rough side evens out grooves and irregularities on the blade, while the fine side whets it to a keen edge.
