UNIFLUOR ® ePTFE Sheets & Gaskets.

UNIFLUOR ® ePTFE Sheets & Gaskets.

MULTIDIRECTIONAL ORIENTED PTFE | Ws 7745 HB
Description
UNIFLUOR® ePTFE gasket WS 7745 HB was deve loped for the use in stress-sensitive flange connections and consists of: UNIFLUOR® ePTFE gasket [low density] with inner eyelet, made from sintered, almost non-porous 3MTM DyneonTM TFMTM WS 7110 [high density]. The inner eyelet increases the diffusion resistance and reduces a possible permeation significantly. The gasket is highly pre-compacted on the outside to ensure that the occurring stresses can be reduced as much as possible in order to reduce the pre defor mation forces. The sealing system is characterised by extremely low leakage rates, very low surface pressures and complies with the highest requirements in pro¬cess purity.

Download Datasheet

100 % pure, virgin PTFE, without fillers, no colouring or stamping ink
High longitudinal and cross strength; extremely low cold flow and a very high pressure stability
Low setting behaviour, only minimal width increase under load
Very good media resistance with the exception of liquid alkali metals and some flourine compounds
PTFE is physiologically harmless for continuous operation temperatures up to 260 °C as per BG no. 21
FDA-conform and complies with regulations in Europe and Asia for food use
Anti-adhesive surface
UV- and ageing resistant, no embrittlement
Complies with TA Luft 2002 [VDI 2440/2200] leakage requirements
Good non-stick characteristics
Excellent [di]electric properties
Prime elasticity

Non-metallic gaskets for pipeline flanges, device and container flanges, pumps and valves
Broad range of applications primarily in the chemical and petro- chemical sector
Use in food sector and pharmaceutical production
Suitable for the use in oxygen applications
Sealing of stress-sensitive materials such as enamel, FRP, glass, ceramic
Suitable as sheet material for punching and on-demand cutting [all shapes] for repairs and revisions
For designs with inner eyelets, used for increased requirements for cleanliness and blow-out resistance [technical tightness]

Product Range

Technical delivery conditions as per DIN 28091

Dimensions: 1500 x 1500 mm [standard format]
Available thicknesses: 0.5 to 6.0 mm [9 mm upon request]

Dimensions:
- for steel/stainless steel flanges as per DIN EN 12560-1 or ASME B 16.21
- for plastic flanges FRP, sight glass, enamel etc., following the design specification, upon request
- Non-standard sizes
Made from:
- UNIFLUOR® WS 7745
- UNIFLUOR® WS 7745 IB, gaskets with TFM^TM-inner eyelet [WS 7110], standard thickness 2.0 mm
- UNIFLUOR® WS 7745 HB, gaskets with TFM^TM-inner eyelet [WS 7110], pre-compressed edge, standard thickness 2.0 mm

Additionally: IDT Profile Overview I FD Series

Additional Designs

UNIFLUOR® ePTFE-sealing tape MultiTex®-FG [WS 7770]

UNIFLUOR ® ePTFE Sheets & Gaskets.